首页

当前位置: 首页 > 学术讲座 > 正文

海外学者云课堂:Understanding and controlling icing on surfaces: from aeronautics to energy systems and sensor technologies

编辑: 浏览数: 发布时间:2020-12-31

应航天航空学院机械结构强度与振动国家重点实验室Marie-Jean Thoraval教授邀请,University of Milano-Bicocca 的Carlo Antonini博士将举办线上讲座。

报告人:Dr. Carlo Antonini

讲座时间2021年1月4日午4:00 – 6:00

讲座方式:腾讯会议144 015 480

讲座题目:Understanding and controlling icing on surfaces: from aeronautics to energy systems and sensor technologies

讲座摘要:

Icing has long been recognized as a serious hazard for safety and for functioning of systems in diverse areas such as transportation, power and communication systems, infrastructures, and even domestic or commercial appliances. The control of water behavior at the interface through the tailoring of surface wetting properties represents a great scientific and technological challenge and opportunity, which can be used as a strategy to control and mitigate ice formation on surfaces. During the lecture, Dr. Antonini will present his research activities focused on understanding the interaction mechanism between liquid and solid surfaces in freezing conditions. Focus will be given to the effects of surface wetting and topography on ice nucleation, to the wetting behavior of superhydrophobic surfaces in icing conditions, and to ice adhesion, highlighting the role of environmental conditions where relevant. A brief discussion of practical issues, challenges, and innovations in using non-wetting coatings will also presented.

报告人简介:

I received the BSc in Aerospace Engineering (2004) and the MSc in Aeronautical Engineering (2007), from Politecnico di Milano, Italy, and the PhD in Technologies for Energy and Environment from University of Bergamo (2011), Italy, with a thesis titled “Superhydrophobicity as a strategy against icing”. In 2012, I received support from the European Research Council (ERC) to join ETH Zurich, Switzerland, as a Marie Curie Fellow; I worked in the Laboratory of Thermodynamics in Emerging Technologies on the project “ICE2: ICEphobicity for severe ICing Environments”. In March 2015 I joined EMPA – Swiss Federal Laboratory for Material Science and Technology – as scientist, focusing on the control of surface wetting properties of cellulose-based materials for various engineering applications, ranging from liquid separation (oil remediation) to thermal insulation. Since 2017 I am the scientific advisor of ApiTech, an italian startup supporting innovation in SMEs. In September 2018 I joined the Department of Materials Science at the University of Bicocca-Milano (Italy), as tenure-track senior assistant professor, with the support of a Rita Levi Montalcini Fellowship. At UNIMIB I have founded the Surface Engineering and Fluid Interfaces Laboratory (SEFI Lab). I am coordinating the MSCA-ITN project SURFICE - Smart surface design for efficient ice protection and control (2021-2024, 3.5 M€), involving 13 PhD students, 7 universities and 4 companies.

相关链接:

https://en.unimib.it/carlo-antonini

SEFI Labhttps://sefilab.mater.unimib.it/

SURFICEhttps://cordis.europa.eu/project/id/956703

地址:陕西省西安市碑林区咸宁西路28号 邮编:710049

版权所有:西安交通大学航天航空学院

设计与制作:西安交通大学网络信息中心